Rental of Hydraulic Equipments

 

We have stocks for the following items;

  1. Stainless Steel Seamless Tubes ; Both in Inches and MM for 316 / 316L / 317
  2. Hydraulics fittings & Accessories and Hoses.
  3. Rexroth Hydraulic Pumps / Motors / Control Valves
    Contents
  4. Vickers Hydraulic Pumps / Motors / Control Valves
  5. Eaton Hydraulic Pumps / Motors / Control Valves
  6. Danfoss Hydraulic Pumps / Motors / Control Valves
  7. Hagglund Motors
  8. Screw Pumps / Gear Pumps / Gear Motors
  9. ZOLLERN SLEWING DRIVE C/W PINION GEAR
    1. ZHP 3.15 Slewing drive c/w Rexroth motor A2PM 16/61 WVAB030——2 unit
    2. ZHP 3.19 Slewing drive W/O motor—–1 unit
    3. ZHP 3.20 Slewing drive W/O motor——2 unit
    4. ZHP 3.22 Slewing drive c/w Rexroth motor A2FM 28/61 WVAB010—–2 unit
    5. ZHP 3.22 Slewing drive W/O motor—–6 unit
    6. ZHP 3.24 slewing drive c/w Rexroth A2FM45/61 WVAB010——2 unit
    7. ZHP 3.24 slewing drive W/O motor—–12 unit
    8. ZHP 3.25 slewing drive c/w Parker motor P/N 379994 Type 12-060-MF-1V-D-000-000-0——2 unit
  10. ZOLLERN Rope Winch.
    It is brand new & Ex-stock.
    • ZHP 4.22 – Drawing No 1055660——2 Units
    • ZHP 4.25 – Drawing No 1055757——4 Units
    • ZHP 4.26 – Drawing No 1055755——4 Units
  11. Power Units / Winches / Cranes

Rental HPUs

HPU NO: 1 & 2 – 3 KW / 4HP
ELECTRIC MOTOR: 50 Hz/1430 RPM/400V/6.4A
PUMP FLOW RATE: 11 LPM @ 1430RPM
OPERATING PRESSURE: 150 BAR
HYDRAULIC TANK CAPACITY: 27 LITRES
POWER UNIT SIZE: 680(L) x 300(W) x 760(H)
WEIGHT OF POWER UNIT: 70 KG
QUANTITY: 2
11KW-HPU-1
HPU NO: 3 – 11 KW / 15HP
ELECTRIC MOTOR: 50 Hz/1455 RPM/415V/21.2A
PUMP FLOW RATE: 16 LPM @ 1455 RPM
OPERATING PRESSURE: 210 BAR
HYDRAULIC TANK CAPACITY: 58 LITRES
POWER UNIT SIZE: 1000(L) x 700(W) x 1350(H)
WEIGHT OF POWER UNIT: 280 KG
QUANTITY: 1
15KW-HPU
HPU NO: 5 – 15 KW / 20HP
ELECTRIC MOTOR: 50 Hz/1465 RPM/415V/26.7A
60Hz/1765 RPM/440V/24.5A
PUMP FLOW RATE: 40 LPM @ 1465 RPM
48 LPM @ 1765 RPM
OPERATING PRESSURE: 210 BAR
HYDRAULIC TANK CAPACITY: 432 LITRES
POWER UNIT SIZE: 1000(L) x 700(W) x 1700(H)
WEIGHT OF POWER UNIT: 1200 KG
QUANTITY: 1
11KW-HPU-1
HPU NO: 6 – 18.5KW / 25HP
ELECTRIC MOTOR: 50 Hz / 1470 RPM / 380-420V /34.31A
60Hz / 1760 RPM / 420-480V /34.31A
PUMP FLOW RATE: 22 LPM @ 1470RPM
26 LPM @ 1760RPM
OPERATING PRESSURE: 500 BAR
HYDRAULIC TANK CAPACITY: 240 LITRES
POWER UNIT SIZE: 1150(L) x 700(W) x 1450(H)
WEIGHT OF POWER UNIT: 600 KG
QUANTITY: 1
11KW-HPU-1
HPU NO: 7 – 22 KW / 30HP
ELECTRIC MOTOR: 50 HZ / 1460 RPM / 380V / 42 A
50 HZ / 1460 RPM / 415V / 40 A
PUMP FLOW RATE: 60LPM @ 1460 RPM
OPERATING PRESSURE: 210 BAR
HYDRAULIC TANK CAPACITY: 244 LITRES
POWER UNIT SIZE: 1250(L) x 650(W) x 1700(H)
WEIGHT OF POWER UNIT: 520 KG
QUANTITY: 1
HPU NO: 8 – 22 KW / 30 HP
ELECTRIC MOTOR: 60 Hz / 1752 RPM / 480V / 33.3A
PUMP FLOW RATE: 45 LPM @ 1752 RPM
OPERATING PRESSURE: 210 BAR
HYDRAULIC TANK CAPACITY: 432 LITRES
POWER UNIT SIZE: 1360(L) x 700(W) x 1450(H)
WEIGHT OF POWER UNIT: 500 KG
QUANTITY: 1
22KW-HPU
HPU NO: 9 & 10 – 22 KW / 30HP
ELECTRIC MOTOR: 60 HZ / 1764 RPM / 440V / 30A
PUMP FLOW RATE: 40 LPM @ 1764 RPM
OPERATING PRESSURE: 200 BAR
HYDRAULIC TANK CAPACITY: 198 LITRES
POWER UNIT SIZE: 600(L) x 600(W) x 1300(H)
WEIGHT OF POWER UNIT: 320 KG
QUANTITY: 2
hpu-11
Diesel Engine Driven HPU
HPU NO: 11 – 24 KW Engine / 30 HP
Engine: 1875RPM
PUMP FLOW RATE: 55LPM@1875 RPM
OPERATING PRESSURE: 250 BAR
HYDRAULIC TANK CAPACITY: 230 LITRES
POWER UNIT SIZE: 600(L) x 800(W) x 1800(H)
WEIGHT OF POWER UNIT: 850 KG
QUANTITY: 1
hpu21
HPU NO: 21 – 22KW / 30HP
ELECTRIC MOTOR: 60 HZ / 1755 RPM / 230V – 460V / 68.8A – 34.4A
PUMP FLOW RATE: 270 LPM @ 0 BAR
125 LPM @ 250 BAR
OPERATING PRESSURE: 0 – 250 BAR
HYDRAULIC TANK CAPACITY: 1000 LITRES
POWER UNIT SIZE: 1650(L) x 1070(W) x 2000(H)
WEIGHT OF POWER UNIT: 1500 KG
QUANTITY: 1
11KW-HPU-111KW-HPU-1
HPU NO: 12, 13 & 14- 30KW/ 40 HP , 36KW /48 HP

ELECTRIC MOTOR:
30 KW / 40 HP – 50 Hz/1460RPM/400V/56.52A
36 KW / 48 HP – 60 Hz/1750RPM/480V/56.52A

PUMP FLOW RATE:
30 KW / 40 HP – 50 LPM @ 1460 RPM
36 KW / 48 HP – 60 LPM @ 1750 RPM
OPERATING PRESSURE: 240 BAR
HYDRAULIC TANK CAPACITY: 250 LITRES
POWER UNIT SIZE: 910(L) x 710(W) x 1530(H)
WEIGHT OF POWER UNIT: 520 KG
QUANTITY: 4
11KW-HPU-1
HPU NO: 16 – 45 KW / 60 HP, 52 KW / 69 HP

ELECTRIC MOTOR:
45KW/60HP – 50 Hz/1475RPM/400V/81A
52KW/69HP – 60 Hz/1775RPM/460V/80A

PUMP FLOW RATE:
150 LPM @ 1475 RPM
180 LPM @ 1775 RPM
OPERATING PRESSURE: 250 BAR
HYDRAULIC TANK CAPACITY: 400 LITRES
POWER UNIT SIZE: 1300(L) X 1140(W) X 1300(H)
WEIGHT OF POWER UNIT: 800KG
QUANTITY: 1
hpu20
HPU NO: 20 – 75KW / 100HP

ELECTRIC MOTOR:
50HZ / 1480 RPM / 230V / 228A & 460V / 114A
60HZ / 1760 RPM / 190V / 270A & 380V / 135A
PUMP FLOW RATE: 270 LPM @ 0 BAR
125 LPM @ 250 BAR
OPERATING PRESSURE: 0 – 250 BAR
HYDRAULIC TANK CAPACITY: 1000 LITRES
POWER UNIT SIZE: 1700(L) x 2050(W) x 2100(H)
WEIGHT OF POWER UNIT: 2500 KG
QUANTITY: 1
11KW-HPU-1
HPU NO: 17 – 90 KW / 120 HP

ELECTRIC MOTOR:
50 Hz/1480 RPM/415V/153A
60 Hz/1785 RPM /440V/140A

PUMP FLOW RATE:
154 LPM @ 1480 RPM
187 LPM @ 1785 RPM
OPERATING PRESSURE: 250 BAR
HYDRAULIC TANK CAPACITY: 409 LITRES
POWER UNIT SIZE: 1100(L) x 1000(W) x 1750(H)
WEIGHT OF POWER UNIT: 1200 KG
QUANTITY: 1
90KW-HPU
HPU NO: 18 – 90 KW / 125 HP

ELECTRIC MOTOR:
50 Hz/1500RPM/415V/15.1A
60 Hz/1800RPM/440V/142.5A

PUMP FLOW RATE:
196 LPM @ 1500 RPM
228 LPM @ 1800 RPM
OPERATING PRESSURE: 250 BAR
HYDRAULIC TANK CAPACITY: 1500 LITRES
POWER UNIT SIZE: 2000(L) x 1350(W) x 2175(H)
WEIGHT OF POWER UNIT: 2500 KG
QUANTITY: 1
11KW-HPU-1
HPU NO: 19 – 111KW / 150 HP
ELECTRIC MOTOR: 60HZ/1780RPM/460V/175A
PUMP FLOW RATE: 240 LPM @ 1780 RPM
OPERATING PRESSURE: 280 BAR
HYDRAULIC TANK CAPACITY: 765 LITRES
POWER UNIT SIZE: 2100(L) x 1300(W) x 2000(H)
WEIGHT OF POWER UNIT: -2500 KG
QUANTITY: 1

Rental / Selling Cranes

Maker - Maritime Hydraulics - Norway
Maker – Maritime Hydraulics – Norway
Fixed box boom deck crane – 0.9 Ton @ 7.5 M
Pulling Capacity in Tons: 0.9 Ton @ 7.5M
Cranes05
Used HLM 25-4 Crane c/w Winch SWL 1500Kg + Power unit – 2 units
Outreach in Meters /
Capacity in Kg By
Direct Hook:
2.99M /8000 Kg
4.93M /4850 Kg
6.88M /3350 Kg
8.85M/ 2450 Kg
10.7M /1800 Kg
12.62M /1450 Kg
Delivery – Ex stock – GHPL, subject to prior sales. (As its condition) Photo Attached.

 

Cranes06
Used HLM 25-4 Crane c/w Winch SWL 1500kg + Power unit – 1 unit
Outreach in Meters/
Capacity in Kg By
Direct hooks:
2.79M /9000 Kg
4.93M /5000 Kg
6.88M /3300 Kg
8.85M /2500 Kg
10.7M /2000 Kg
12.62M / 1600 Kg

 

Cranes02
CRANE DIMENSION IN CLOSING POSITION: LENGTH 2500MM X WIDTH 2100MM X HEIGHT 2400MM
CRANE MAXIMUM WORKING LOAD AT 6.5 METER: 1300KG AT 200 BAR
CRANE MAXIMUM WORKING
LOAD AT 4.4 METER:
2000KG AT 200 BAR
CRANE MAXIMUM WORKING
LOAD AT 3.4 METER:
2600KG AT 200 BAR
CRANE MAXIMUM WORKING
LOAD AT 2.8 METER:
3000KG AT 200 BAR

 

Crane06

Crane07
  • Stage 1 SWL 1000kg at 3.6 meters
  • Stage 2 SWL 525kg at 3.6 to 4.7 meters
  • Stage 3 SWL 375kg at 4.7 to 5.5 meters
  • Crane winch brake load test to 125% of SWL
  • Crane maximum working pressure 280 bar.

 

Hiab Crane
Refurbished Heila crane –HLRM 19 4S , with winch, without powerpack
Outreach in Meters /Capacity in Tons: 2.79 M / 7.0 Tons4.89 M / 4.0 Tons6.89 M / 2.8 Tons8.90 M / 2.1 Tons10.94 M / 1.6 Tons12.94 M/ 1.3 Tons

Rental / Selling Winch

14 Sept 12 236 Steamer Reel WinchTechnical Specifications: 1 Unit

  • 1) Drum Capacity is 8500mxØ64mm Cable@ ≈22 Layer
  • 2) Rated Pull 7Tx25m/min (1st layer)
  • 3) Brake Holding 10T (static 1st layer)
Double Streamer Winch – 2 units
6t pull/18t brake
Type 618908
imageplan
TECHNICAL SPECIFICATIONDrum Dimension
2 x ø3800/ø1800×2950.
Net volume of drum is then 2 x 25.9 m3.
The drums are supported by an ODIM gearbox on one end, and by a spherical roller bearing
on the other end. The gearboxes take care of the axial loads.

Capacity
Approx. 800 meters of Lead-In cable ø35mm on each drum
Approx. 6000 meters of Streamer cable ø64mm fluid cable on each drum,
or approx. 6000 meters of Streamer cable ø50mm solid cable fluid cable on each drum
Square cable is used for calculation of cable capacities.

Pulling Force
Both drums: 60kN on inner layer of Lead In cable
Pull forces will be half of this when running in high speed.
• The design allows a maximum tension of 30kN in the Streamer cable.

Static Brake Force
Minimum 150kN and maximum 180kN on inner layer of both drum.

Drive
ODIM gearbox with two (2) two-speed Wheel motor on both drums.

Required Oil Pressure
Pressure drop = 215 bar to maintain maximum pull force.

Required Oil Flow
115 l/min at full speed (one- and two-speed) on each drum.

Pulling Speed
Inner layer 34 meters/min. 6 RPM low speed
Outer layer 71 meters/min. 6 RPM low speed
Inner layer 68 meters/min. 12 RPM High speed
Outer layer 144 meters/min. 12 RPM High speed

Capturelayout Streamer Storage Winch – 3 units 

Type IAM500Drum Dimersion
Ø2600 / ø1400 – 2000

Capacity
Approx. 2100 meters of ø60 mm streamer cable.
Drive
Reduction gear with hydraulic motor (Brake valve)
Oil consumption
33 l/min – 12 RPM
Pulling Force
Inner layer = 6750 N, Outer layer = 3880 N.

Pulling Speed
12 RPM: 55m/min l.L – 95m/min O.L.

Weight
Approximately 2.5 Tons without cable.

Capture Pull Load Test of the Winch:

S.NO Pressure Ton Brake Hold test with cylinder
and
load cell in Tonnage
1 50bar 3.39T 25.4T
2 100bar 6.69T
3 150bar 9.89T
4 200bar 13.5T
5 220bar 15.38T ~ 13.58T
78 Hose Reel: DRUM BARREL 1000mm, YEAR 2010
RATING: 400M X 4 INCH DIA HOSE, 2T 15M MIN 1st LAYER
ZOLLERN SLEWING DRIVE C/W PINON

1) ZHP 3.15 Slewing drive c/w Rexroth motor A2PM 16/61 WVAB030——2 unit
2) ZHP 3.19 Slewing drive W/O motor—–1 unit
3) ZHP 3.20 Slewing drive W/O motor——2 unit
4) ZHP 3.22 Slewing drive c/w Rexroth motor A2FM 28/61 WVAB010—–2 unit
5) ZHP 3.22 Slewing drive W/O motor—–6 unit
6) ZHP 3.24 slewing drive c/w Rexroth A2FM45/61 WVAB010——2 unit
7) ZHP 3.24 slewing drive W/O motor—–12 unit
8) ZHP 3.25 slewing drive c/w Parker motor P/N 379994 Type12-060-MF-1V-D-000-000-0–2 unitZOLLERN Rope Winch.

It is brand new & Ex-stock.

1 ZHP 4.22 – Drawing No 1055660 2 Units
2 ZHP 4.25 – Drawing No 1055757 4 Units
3 ZHP 4.26 – Drawing No 1055755 4 Units
2013Annotation 2019-11-12 095833 LOAD TEST READINGS WITH THREE HYDRAULIC MOTORS
DRIVING THE WINCH:

S.NO PRESSURE (BAR) LOAD ( TONS) @ 1st Layer
1 50 7.6
2 100 15.00
3 150 25.70
4 200 34.00
5 250 40.70
Hydraulic winch
Maximum Load: 7.5TONS @first layer @ 210 BAR Pressure
Drum capacity : 328 metres of Dia . 19mm wire rope
Displacement of Hydraulic Motor : 100cc /rev
Gear ratio: 1: 63
Overall size : 1500 (L) X 1000 ( W) X 800 (H)
Total weight : Approx. 1000 kgs
Winch Rental
Cable Drum Winch
Technical Specification:
First Layer Pull: 10 Ton
Top Layer Pull: 2 Ton
Dia:19mm cable accommodate 5000 meters.
Winch Consist of Saucer Danfoss Hydraulic Motor c/w GearBox and Disk Brake.
Hydraulic Motor Coupled into Slew Ring Assembly.

Rental Air Winches

Air Winch
Maximum Load : 2.5 Tons @first layer @5 Bar Pressure
Drum capacity : 140 Metres of ½” Dia wire rope
Overall Size : 1400 (L) X 700 ( W) X 800 ( H)
Total weight : 430 kgs.
20160129_153711here (2)
RAM Winch -Model: K6UL AMBL
Maximum Load : 10000Lbs @ first layer @ 6 Bar Air pressure
Drum capacity: 815 feet of ¾” dia. Wire rope
Overall size:
1700 ( L) X 1000 ( W) X 1000 (H)mm
Total weight: 945 kgs
Crane08Electrical Winch With 300Kg SWLtest1
1.5 Ton Air Winch
7 Bar Operating Pressure At the first layer
1
Electrical Winch 650kg SWL
WINCH PARTICULARS:
CAPACITY: 650 kg swl,
BRAKE HOLDING: 930kg
DIAMENSIONS OF THE WINCH : L 1530mm X H 1450mm X W 1150mm.
DIAMENSIONS OF THE WINCH : O.D 1020mm X I.D 410mm X L 500mm.
GEAR RATIO : 1:60
ELECTRICAL MOTOR : 7.5KW, 4 POL, 1450RPM AT 50 HZ
ELECTRICAL MOTOR DRAWN AMPS @
650KG:-
HOISTING-14-17 AMPS, LOWERING 7-9
AMPS
Electric Winch 2.5 Ton SWL
2
1. SWL 2.5 Ton Max, @12.5 Amps motor current.
2. Tested Load: 3.2 Ton
3. Electric Motor: 7.5HP/5.5Kw 415V/50Hz D.O.L, FWD,REV
4. Winch Model: KPL 12 PLANE TARY WINCH
5. Cable drum dimensions
Barrel Diameter: 9.85″ (250 mm)
Flange Diameter: 15.75″ (400 mm)
Barrel Length: 17.60″ (447 mm)
6. Cable storage capacity
1/2″ cable 711′ (217m)
9/16″ cable 491′ (150m)
5/8″ cable 478′ (146m)
3/4″ cable 316′ (96m)
7. Overall all dimension:
1231 mm L x 480 mm W x 420 mm H
winches01
5 TON ELECTRIC WINCH – 1 UNIT
Technical Specification:-
Lifting capacity: 5,000 Kg at Wire rope top layer
Power Source:
Gear Ration:
3 Phase 380 – 440V
197:1
Maximum lifting height: 192m
Braking methods: Electromagnetic
Wire Rope: 22.4mm x 200m
Drum length: 680mm
Drum Dia 324mm
Drum Flange dia: 570mm
Gross Weight: 570mm
Body Dimension (L x D x H): 1,860 x 740 x 905mm

 

GHPL HYDRAULIC JACK CYLINDER STOCK DETAILS (AS ON 26/10/2017)

HYDRAULIC STANDARD JACK CYLINDER DETAILS ( SINGLE ACTING, SPRING RETURN CYLINDERS)

JACK CYLINDER IDENDIFICATION NO QTY CYLINDER TYPE TONAGE (AT MAX PRESSURE) IN TON OUTSIDE DIAMETER IN MM PLUNGER / ROD DIA IN MM HOLLOW CYL HOLE DIA IN MM CYLINDER BORE AREA IN CM² COLLAPSED HEIGHT IN MM STROKE LENGTH IN MM MAX PRESSURE IN BAR MAKE & MODEL
1A & 1B 2 SOLID 5 38 25.4 NA 6.5 165 76 700 ENERPAC (RC-53)
2 1 SOLID 10 82 X 55 38.1 NA 14.5 43 11 700 ENERPAC (RSM-100)
3 1 SOLID 10 57 38.1 NA 14.5 89 26 700 ENERPAC (RC-101)
4A, 4B & 4C 3 SOLID 10 57 38.1 NA 14.5 298 203 700 HYDROTEC
5A, 5B, 5C & 5D 4 SOLID 10 57 38.1 NA 14.5 349 257 700 SUN&RUN (RSC-1010)
6A & 6B 2 HOLLOW 13 69 35.1 19 17.9 55 8 700 HYDROTEC
7 1 HOLLOW 13 69 35.1 16 17.9 81 25 700 HYDROTEC
8 1 HOLLOW 20 99 54.1 26.9 30.7 162 49 700 ENERPAC (RCH-202)
9A & 9B 2 SOLID 25 85 57.2 NA 33.2 374 261 700 HYDROTEC
9C & 9D 2 SOLID 25 85 57.2 NA 33.2 323 210 700 HYDROTEC
10 1 SOLID 30 101 66.5 NA 42.1 117 62 700 ENERPAC (RCS-302)
11 1 HOLLOW 30 114 63.5 32 46.6 330 155 700 HYDROTEC
12 1 SOLID 30 101 57.2 NA 42.1 387 209 700 HYDROTEC
13 1 HOLLOW 60 159 91.9 53.8 82.3 247 76 700 ENERPAC (RCH-603)
14 1 HOLLOW 60 159 91.9 53.8 82.3 323 153 700 ENERPAC (RCH-606)
15 1 HOLLOW 95 212 127 79 133 254 76 700 ENERPAC (RCH-1003)
16 1 SOLID 95 177 104.9 NA 133.3 357 168 700 ENERPAC (RC-1006)
23A & 23B 2 SOLID 150 215 115 NA 200.96 300 150 700 SUN&RUN (S150-150)
24A, 24B & 24C 3 SOLID 200 255 135 NA 283.38 300 150 700 SUN&RUN (S200-150)

 

HYDRAULIC JACK CYLINDER DETAILS (NON-STANDARD & NON SPRING RETURN)

JACK CYLINDER IDENTIFICATION NO QTY CYLINDER TYPE TONAGE (AT MAX PRESSURE) IN TON OUTSIDE DIAMETER IN MM PLUNGER / ROD DIA IN MM HOLLOW CYL HOLE DIA IN MM CYLINDER BORE AREA IN CM² COLLAPSED HEIGHT IN MM STROKE LENGTH IN MM MAX PRESSURE IN BAR MAKE
17 1 SOLID 21.8 90 63 NA 31.2 40 10 700 GHPL
18A & 18B 2 SOLID 21.8 90 63 NA 31.2 50 25 700 GHPL
19A, 19B & 19C 3 SOLID 21.8 90 63 NA 31.2 101 70 700 GHPL
20 1 SOLID 21.8 90 63 NA 31.2 148 105 700 GHPL
21A & 21B 2 SOLID 57.2 148 102 NA 81.7 45 45 700 GHPL
22 1 SOLID 200 355 215 NA 363 350 175 550 GHPL

 

PUMPS STOCK DETAILS (AS ON 26/10/2017)

S NO IDENTIFICATION /DESCRIPTION RESERVOIR CAPACITY IN LITRES TYPE OPERATION MAX PRESSURE IN BAR MAKE REMARK
1 BLUE COLOR, HANDPUMP, OUT PUT – 1/4″ NPT X QDC FITTING & COMES WITH PRESSURE GAUGE 0.8 SINGLE ACTING MANUAL 500 NO DETAILS
2 BLUE COLOR, HANDPUMP, OUT PUT – 1/4″ NPT X QDC FITTING & COMES WITH PRESSURE GAUGE 0.9 SINGLE ACTING MANUAL 700 SPX POWERTEAM MODEL-P55
3 YELLOW COLOR, HANDPUMP, OUT PUT – 1/4″ NPT X QDC FITTING & COMES WITH PRESSURE GAUGE 0.9 SINGLE ACTING MANUAL 700 ENERPAC MODEL-P391
4 BLACK COLOR, HANDPUMP, OUT PUT – 1/4″ NPT X QDC FITTING & COMES WITH PRESSURE GAUGE 2.3 SINGLE ACTING MANUAL 700 EUROPRESS MODEL-PL16216 SOLD
5 YELLOW COLOR, SMALL SIZE, ELECTRICAL OPERATED PUMP, 230V/ 1 PHASE / 50HZ, OUT PUT – 1/4″ NPT X QDC FITTING – 2 SETS & COMES WITH PRESSURE GAUGE 3.8 DOUBLE ACTING ELECTRICAL OPERATED 700 ENERPAC MODEL-PUJ-1401E
6 YELLOW COLOR, AIR OPERATED PUMP, OUT PUT – 1/4″ NPT X QDC FITTING – 2 SETS & COMES WITH PRESSURE GAUGE 6.6 DOUBLE ACTING AIR OPERATED 700 ENERPAC MODEL-ZA4308MX
7 YELLOW COLOR, MEDIUM SIZE, ELECTRICAL OPERATED PUMP, 230V/ 1 PHASE / 50HZ, OUT PUT – 1/4″ NPT X QDC FITTING – 2 SETS & COMES WITH PRESSURE GAUGE 8 DOUBLE ACTING ELECTRICAL OPERATED 700 ENERPAC MODEL-ZU4208PE
8 YELLOW COLOR, ELECTRICAL & FOOT PEDAL OPERATED PUMP, 220V/ 1 PHASE / 50HZ, OUT PUT – 1/4″ NPT X QDC FITTING & COMES WITH PRESSURE GAUGE 8 SINGLE ACTING ELECTRICAL OPERATED 700 EKT CHINA MODEL CJB-700A
9 STAINLESS STEEL FRAM, AIR OPERATED PUMP, OUT PUT – 1/4″ NPT X QDC FITTING & COMES WITH PRESSURE GAUGE 10 SINGLE ACTING AIR OPERATED 2500 SC HYDRAULIC
10 HAND OPERATED WATER PUMP, OUT PUT – 1/4″ NPT X 1/4″ JIC FITTING & COMES WITH PRESSURE GAUGE 4.5 SINGLE ACTING MANUAL 50 KYOWA MODEL-T50K-P